Canon 7000 series printers.

Theory

The ink in these cartridges is retained because the cartridge has an internal sponge.

Instructions

1. Seal the outlet holes in the base of the cartridge with tape.

2. Peel back label on top of cartridge enough to expose the filling holes, as shown.

3. Enlarge the filling hole(s) in the top of the cartridge(s) using the 1/16" thumb drill provided.

4. Push needle all the way into the cartridge of the appropriate color filling hole.
Note: The cartridge contains sponge and a slight resistance may be felt.
Very slowly inject up to 5 cc of color ink into the sponge until the cartridge is full.
When full, ink may seep from the filling and outlet holes.

5. Seal the filling holes(s) in the top of the cartridge by reapplying the label.

6. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different color ink.

7. Remove the adhesive tape on the outlet hole(s) and run 1 - 3 cleaning cycles as per printer instructions.

BC-62 Photo Cartridge

The BC-62 photo cartridge has 6 ink wells.  The ink wells on the front of the cartridge are the  normal inks.  The 3 ink wells on the back of the cartridge are the photo inks.  Each ink well will hold up to 3cc of color ink.  Fill according to the instructions above.

A Refill Kit should include Ink plus the following:
3 Syringes for color.
Aluminum Tape
Thumb Drill

www.PrinterFillingStation.com
Printer ink and Refill kits for your Printer