Refill Instructions for Color cartridge

Instructions

1. Put the cartridge on some paper towels in an area where you can tolerate a spill.

2. Peal off the top label.

3. You will notice three small holes (too small for a syringe needle to get into). Drill each hole larger with a thumb drill.

4. Fill the syringe with 6 ml. of color ink.

5. Very S-L-O-W-L-Y inject ink into each chamber until the sponge full

6. When finished leave the top label off and the filling holes exposed (when printing it has to pull in air).

7. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
Or print the following page:
http://www.refillinstructions.com/color.htm  
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge. (Allows ink to flow to the print head).