Refill Instructions Canon PGI-5

Refill Instructions Canon PGI-5BK, CLI-8 Compatible Cartridges


Black & Color Cartridges 1. Cover the outlet hole with the orange outlet seal that came with the cartridge or with your finger over the outlet port while wearing latex gloves or with some vinyl tape to prevent ink loss during refilling. 2. Pull the rubber plug out that is sealing the filling hole. 3. Attach the needle to the syringe and fill with the correct color ink. 4. Slowly inject the correct color into into the filling hole until the chamber is almost full. Unused ink may be returned to the bottle. 5. Seal the filling hole using the rubber plug you pulled out. This hole must be sealed air tight or all your ink will drip out. 6. Remove the orange outlet seal (or your finger, or the vinyl tape) from the outlet hole. 7. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions. Or print the following pages: http://www.refillinstructions.com/black.htm for Black http://www.refillinstructions.com/color.htm for Color If you are filling cartridges to use later, leave the orange outlet seal on the cartridge. This will prevent your sponge from drying out.