HP #38 & #88

 RefillableCartridges

Instructions

1. Put the cartridge on some paper towels in an area where you can tolerate a spill.

2. Remove the green plug from the filling hole.

3. Put the needle on the syringe and fill with ink.
The Black #88 will take approximately 40ml
The color cartridges (#88 and #38) will take approximately 25ml
The Black #38 will also take 25ml

4. Very S-L-O-W-L-Y inject ink into the filling hole.
If the ink bubbles out of the filling hole wait a minute and then continue.

5. When finished, replace the green plug into the filling hole.

6. The cartridge is now ready for use.

A Refill Kit should include Ink plus the following:
30cc syringe with blunt needle for each color

www.PrinterFillingStation.com
Printer ink and Refill kits for your Printer